| | |
Mini Carbon Marvering Set(Reference #9BMT22)
This is an absolute must have this set of small marvering tools come with a carbon shape mounted on a wooden handle just like their big brothers. There are six in the and every one has a multitude of uses. There are two paddles, two rods, one triangle and a pointed rod all in quality carbon.
Price: £27.75 (Excluding: VAT at 17.5%) | |
|
|
| | Torch Holder(Reference #9BMT.17)
A very secure mounting for Mapp or Propane tanks for bead making. Bracket rests on edge of bench and is fastened by a G clamp (not included) Allows full adjustment of head, ring clap allows easy installation or removal of the tank. Recomened use with the hot head.
Price: £30.74 (Excluding: VAT at 17.5%) |
|
|
Hot Head - Bead Making Torch(Reference #9BMT.16)
Developed and designed exclusivly for the bead making industry, this torch head is for Mapp gas only which gives more oxygen to the head for truer, clearer, more vibrant colours.Inexpensive and removes the need for elaborate fuel and oxigen tanks. Easy to set up.
Reccomended additions: 9BMT.17 Torch Holder. and 9BMT Padded Arm Rest.
Price: £22.90 (Excluding: VAT at 17.5%) |  |
|
|
| | Pipe & conector kit for oxygen concentrators (Reference #9BMT.21a)
This when bought with concentrator allows you to connect up quickly. Contains Propane adjustable valve with bar markings, 2m orange gas pipe 3m clear oxygen pipe and clips required.
Price: £39.99 (Excluding: VAT at 17.5%) |
|
|
Padded Arm Rest(Reference #9BMT.18)
Designed by a lampworker to prevent nerve damge tomteh forearm. Left and righth handed forearm pads are mounted on stainless steel base to be set on a table edge for use. Suitable for use with all beadmaking burners 630mm long.
Price: £21.99 (Excluding: VAT at 17.5%) |  |
|
|
 | Minor Bench Burner(Reference #9BMT.19)
Bench Burner specialy designed with surface mix stainless steel front end and precision needle valves. Uses either natural or propane gas with easily adjustable control valves. Variable flame size without changing tips. fully adjustable can be removed from stand to use by hand ideal fro rods up to 45mm in diameter. reccomended operating pressue .25-5psi gas/5-15psi oxygen.
Price: £168.75 (Excluding: VAT at 17.5%) |
|
|
Didium Glasses W/Side sheild(Reference #9BMT.20)
If you only one peice of kit this is it. we cannot emphasis how important these are.as without you will if doing bead work loose your eye sight. Didium safety glasses filter out some of the Infer red an UV along with absorbing the bright yellow flare associated with glass working. These glasses allow viewing of the glass when being worked whilst protecting the eyes.
Price: £32.59 (Excluding: VAT at 17.5%) |  |
|
|
 | 38mm Cherrywood Marble Mold(Reference #9BMT.15.6)
A solid cherrywood mold, these are professional tools, precisly shapes glass into a round object. Designed to be used wet. The mold must be kept in water after use and never be allowed to dry out. The mold will improve as a carbon deposit builds up on the inside. One Supplied.
Price: £19.99 (Excluding: VAT at 17.5%) |
|
|
32mm Cherrywood Marble Mold(Reference #9BMT.15.5)
A solid cherrywood mold, this professional tool precisly shapes glass into a round objrct. Designed to be used wet. The mold must be kept in water after use and never be allowed to dry out. The mold will improve as a carbon deposit builds up on the inside. One Supplied.
Price: £19.99 (Excluding: VAT at 17.5%) | |
|
|
| | 25mm Cherrywood Marble Mold(Reference #9BMT.15.4)
A solid cherrywood mold, this professional tool precisly shapes glass into a round objrct. Designed to be used wet. The mold must be kept in water after use and never be allowed to dry out. The mold will improve as a carbon deposit builds up on the inside. One Supplied.
Price: £19.99 (Excluding: VAT at 17.5%) |
|
|
19mm Cherrywood Marble Mold (Reference #9BMT.15.2)
A solid cherrywood mold, this professional tool precisly shapes glass into a round objrct. Designed to be used wet. The mold must be kept in water after use and never be allowed to dry out. The mold will improve as a carbon deposit builds up on the inside. One Supplied.
Price: £19.99 (Excluding: VAT at 17.5%) | |
|
|
| | 16mm Cherry Wood Marble Mold(Reference #9BMT.15.1)
A solid cherrywood mold, this professional tool precisly shapes glass into a round objrct. Designed to be used wet. The mold must be kept in water after use and never be allowed to dry out. The mold will improve as a carbon deposit builds up on the inside. One Supplied.
Price: £19.99 (Excluding: VAT at 17.5%) |
|
|
Graphite Bead Making Paddle(Reference #9BMT.14)
A beadmakers must have!. A heavy duty duel purpose with multi cavities making this a very versatile paddle, with it's flat back Fine grain graphite with a sturdy wooden handle
Price: £99.19 (Excluding: VAT at 17.5%) | |
|
|
| | 76 x 100mm Marvering Graphite Paddle (Reference #9BMT.13.2)
Ideal for bead making. Fine grain high density graphite with a wooden handle.
Price: £11.11 (Excluding: VAT at 17.5%) |
|
|
50 x 75mm Marvering Graphite Paddle(Reference #9BMT.13.1)
Ideal for bead making. Fine grain high density graphite with a wooden handle.
Price: £9.85 (Excluding: VAT at 17.5%) | |
|
|
 | Milli Marvering Plate(Reference #9BMT.12)
Torch mounted graphite marver for shaping glass . Acts also as a shelf to avoid thermal shock when preheating millifiori chips and rods.Mounting clamp provides easy mounting to torch head.
Price: £12.37 (Excluding: VAT at 17.5%) |
|
|
Bead Marvering Paddle(Reference #9BMT.11)
Designed specialy for bead makers, this paddle makes smooth round or cylindrical beads.
Marvering wells are 12.5mm, 15mm, 20mm, 25mm.has a smooth back for normal marvering. 114 x 64 x 19mm.
Price: £72.59 (Excluding: VAT at 17.5%) | |
|
|
| | Solid Graphite Marvering Plate (Reference #9BMT.10)
305mm x 305mm x 13mm of solid fine grain graphite . This plate is an ideal and usefull fixture for the torchwork artist.
Price: £48.15 (Excluding: VAT at 17.5%) |
|
|
Stainless Steel Self Closing Tweezers(Reference #9 BMT.09)
Once clampled these tweezers will not let go until released. Squeeze to open and release to close, has curved fine serated tips and heat proof handle. 165mm length.
Price: £3.45 (Excluding: VAT at 17.5%) |  |
|
|
 | Glass Shears(Reference #9BMT.08)
152mm length with 51mm blades. This vintage design is ideal fro trimming the ends of hot glass rods or for using in other hot glass applications.
Price: £4.93 (Excluding: VAT at 17.5%) |
|
|
Stainless Steel Bent Tweezers(Reference #9BMT.07)
A usefull lamp working tool. These traditional tweezers( squeeze to close) have sharp curved points. integral pin assures alignment of closed points.
Price: £2.96 (Excluding: VAT at 17.5%) |  |
|
|
 | Parallel Action Mashers (heavy duty)(Reference #9BMT.06)
Heavy duty pliers with 38mm square mashing plates. Plates remain perallel when squeezed. spring maintains open position 17.5mm opening
Price: £35.56 (Excluding: VAT at 17.5%) |
|
|
Mini Glass Flaterners.(Reference #9BMT.05.2)
A handy tool for beadmakers. flatening pads are 12.5mm square overall length 203mm
Price: £18.52 (Excluding: VAT at 17.5%) |  |
|
|
 | Parallel Closing Flaterners.(Reference #9BMT.05.1)
Length 241mm with 51 x 51mm stainless steel 1.6mm thick pads mounted on a sprung loaded steel frame. Designed for parallel closing which maintains a uniform thisckness.Insulated wooded handles.
Price: £33.33 (Excluding: VAT at 17.5%) |
|
|
Bead Core Scraper Set(Reference #9BMT.04)
Simplifies cleaning bead core after removal from mandrel, wire or rod. Set contains two of each 1.2mm, 1.6mm, 2.0mm. Use two at a time for larger diameter holes
Price: £3.85 (Excluding: VAT at 17.5%) |  |
|
|
| | Bead Makers rake/pics(Reference #9BMT.03)
A light weight versatile beadmakers tool, serves as a rake or a dimpling tool and has many other uses. Knurled grip for positive handelingwith plated steel ends.weight 28gm
Price: £10.59 (Excluding: VAT at 17.5%) |
|
|
Bead Mandrel Block(Reference #9BMT02)
A sturdy support for coated mandrels, holds the mandrels upright while dryng (holds 20 mandrels), sanded wood block 152x89x38mm
Price: £5.85 (Excluding: VAT at 17.5%) |  |
|
|
| | 4.2mm (5/64") Stainless Steel Mandrels (pac of 10)(Reference #9BMT01.3)
High quality stainless steel mandrels for bead making, just requires to be coated with bead release and they are ready to use. A usefull addition is the Mandrel Block 9BMT02
Price: £6.52 (Excluding: VAT at 17.5%) |
|
|
3mm (1/8") Stainless Steel Mandrels (10 in pac)(Reference #9BMT01.2)
High quality stainless steel mandrels for bead making, just requires to be coated with bead release and they are ready to use. A usefull addition is the Mandrel Block 9BMT02
Price: £5.93 (Excluding: VAT at 17.5%) | |
|
|
| | 1.5mm (3/32") Stainless Steel Mandrels (pac of 10) (Reference #9BMT01.1)
High quality stainless steel mandrels for bead making, just requires to be coated with bead release and they are ready to use. A usefull addition is the Mandrel Block 9BMT02
Price: £5.93 (Excluding: VAT at 17.5%) |
|
|
Oxygen Concentrator(Reference #9BMT.21)
This very reliable machine sits next to you quitly and unobtrusivly supplying pure oxygen to your flame head. The machine is wheeled so that it can be moved aroundt with ease. This removes the need for oxygen tanks. Size 650h 550w 300d mm 220v. To allow imidiate set up our conection kit is required Cat No 9BMT.21a
Price: £199.00 (Excluding: VAT at 17.5%) | |
|